Deutsch
English
Pallet and IBC filling
No matter from which product line you choose your filling machine: Feige makes no difference in quality referring to filling valves, filling accuracy and filling speed. The same components are used in all lines.
Pallet filler ELEMENTRA® 6
If you focus on the filling process which of course must fulfil the legal requirements and you use a fork lift truck or a hand pallet truck for placing the pallet/IBC onto the weigh scale select the pallet filler ELEMENTRA® 6.
- Most attractive price
- Shortest delivery time
- "plug and fill" on delivery
After official verification you can directly start.
Pallet filling station ELEMENTRA® 16
With the pallet filling station ELEMENTRA® 16 additional requirements can be fulfilled:
- Driven conveyor system with up to 3 drive units
- Flip-open pit scale
- Stainless steel design
- Advanced protection against highly corrosive products
- Standard stainless steel load cells
- Additional overflow signal
- Nitrogen purging
- Administration of 255 filling parameter sets (9 for pallet filler ELEMENTRA® 6)
- Fully wired on delivery
We recommend calling in our Service Center for connecting the drive units, for commissioning and verification.
The pallet filling station ELEMENTRA® 16 is largely pre-configured and its price and delivery time is between pallet filler ELEMENTRA® 6 and pallet filling equipment ELEMENTRA® 26.
Pallet filler ELEMENTRA® 17
fulfils the same requirements as type 16.
For positioning the filling unit, however, the boom arm is not pivoted but shifted to the side.
Please opt for this type if the area to the right and to the left of the pallet is not accessible to the operator.
Pivoting pallet filling equipment ELEMENTRA® 26
With the pivoting pallet filling equipment ELEMENTRA® 26 further and more complex requirements can be fulfilled:
- Extensive conveyor systems with accessories
- Differences in container heights of more than 800mm
- Bungholes of pallet schemes may point outward
- Level controlled upward movement
- Interface to process control system
- Further adaptations according to your requirements
We recommend calling in our Service Center for installation on site, commissioning and verification.
Coordinate pallet filling equipment ELEMENTRA® 27
fulfils the same requirements as type 26.
For positioning the filling unit, however, the boom arm is not pivoted but shifted to the side.
Please opt for this type if the area to the right and to the left of the pallet is not accessible to the operator.
Automatic pallet filling machine INTEGRA® 37
Automatic pallet filler with automatic detection of filling openings with the matrix camera system. The machine control system positions the filling unit at the filling opening.
Pallet filling robot ELEMENTRA® 71
Comprehensive portal pallet filling robot for filling IBCs, drums and containers with camera system for bunghole detection.
Pallet filling robot ELEMENTRA® 72
Sturdy portal pallet filler for filling IBCs, drums and containers, also designed for multi-layer filling. Bunghole approach by means of joystick.
